Container fill estimator

Enter your total volume and weight to estimate how much of a 20', 40' or 40' high cube container you'd use, and how many containers you'd need.

Estimate only. It compares your totals with the container figures listed below. It is not a 3D stowage or load plan, and carton sizes, pallet footprints, stacking limits and road weight rules can reduce what really fits.

Your cargo
Weight unit

Results update as you type.

Estimate

Estimate only. Your carrier, forwarder or customs authority has the final word.

Container figures used

Nominal figures for specific Hapag-Lloyd general purpose container series, taken from the carrier's published container specification. Where Hapag-Lloyd lists several series, we use the one with the lowest payload. Containers vary by manufacturer, series and carrier, so ask your carrier for the figures of the equipment you will get.

Container internal dimensions, volume and payload
TypeInternal L × W × HL × W × H volumeMax payload usedPayload range listed by Hapag-Lloyd
20' standard (20GP)5,898 × 2,352 × 2,393 mm33.2 m³28,180 kg28,180–30,250 kg
40' standard (40GP)12,029 × 2,350 × 2,392 mm67.6 m³26,700 kg26,700–28,800 kg
40' high cube (40HC)12,032 × 2,352 × 2,700 mm76.4 m³28,200 kg28,200–28,650 kg

Payload is what the container itself is rated to carry. Road and rail weight limits along the route may restrict how much you can actually load, so check them with your carrier or forwarder before planning heavy cargo.

Worked example

25 m³ and 8,000 kg of cartons, with 85% usable space:

  • 20GP: 33.2 m³ internal, so 85% usable is about 28.2 m³. 25 m³ is 75% of internal volume and fits in one 20'. 8,000 kg is 28% of the 28,180 kg payload, so volume is the limit.
  • 40GP: 25 m³ is 37% of its 67.6 m³.

At 30 m³ the cargo would exceed the 28.2 m³ usable in a 20', so the tool would show two 20' containers or one 40'.

Volume or weight: which runs out first?

Light, bulky goods fill a container's space long before reaching its payload. Dense goods reach the payload limit with space left over. A 20' has about half the volume of a 40' but a similar payload rating, so dense cargo can often make better use of 20' containers, while light cargo makes better use of a 40' or 40' high cube. This tool shows which limit you reach first.

Frequently asked questions

How many CBM fit in a 20' container?

A standard 20' has about 33 m³ of internal volume (Hapag-Lloyd lists 33.0–33.2 m³ for its 20' general purpose series). You can load less than that in practice; how much less depends on carton sizes, pallets and stacking. Set the usable-space percentage to match your cargo.

How many CBM fit in a 40' or 40' high cube?

Hapag-Lloyd lists about 67.7 m³ for its 40' standard and 76.3–76.4 m³ for its 40' high cube. As with the 20', the cargo you can actually load is lower.

What is the difference between 40GP and 40HC?

Same external length and width, but the high cube is one foot taller (9′6″ instead of 8′6″ outside), giving about 30 cm more internal height. It suits light, bulky cargo. Payload ratings depend on the individual container.

Is this a load plan?

No. It compares totals with capacity. For exact stowage, use dedicated load-planning software or ask your forwarder.

When does a full container (FCL) beat LCL?

It depends on current rates for your route. Compare an LCL quote (per W/M plus minimums and charges) with an FCL quote for the same shipment.